Model evidence at a glance
Schneider Electric documents OCPP 1.6 JSON Smart Charging for EVlink Pro AC and the Open Charge Alliance lists an EVB3 variant certificate. Sentinel capability remains scoped for AmpNexus review.
Manufacturer documented means public protocol evidence is available. It does not mean the model is onboarded, supported or AmpNexus verified, and it is not electrical safety certification.
Hardware evidence scorecard
Schneider Electric EVlink Pro AC
Certification, integration and observable signals are assessed separately.
- OCPP certificationVerified
- AmpNexus integrationDocumented
- Operational stateNot evidenced
- ConnectivityNot evidenced
- Charging sessionsNot evidenced
- EnergyNot evidenced
- VoltageNot evidenced
- CurrentNot evidenced
- PowerNot evidenced
- TemperatureNot evidenced
- RCD diagnosticsNot evidenced
- Contactor feedbackNot evidenced
- Fault / reset evidenceNot evidenced
- Vendor APINot evidenced
- Sentinel assurance
- Assessment pending
- Observability coverage
- 0 / 12
Coverage counts signal areas with published verified or partial evidence. It is not a charger health score.
Evidence flow
From charger to Sentinel
Charger
Schneider Electric
EVlink Pro AC
Published evidence lanes
- Meaning
- Timestamps
- Provenance
- Limitations
Scope
- Model
- EVlink Pro AC
- Variant or configuration
- A model and configuration exposing the manufacturer-documented OCPP 1.6 JSON interface
- Firmware
- Confirm the installed firmware against the linked manufacturer documentation
- Geography or network context
- UK and European variants where the linked documentation applies
- Evidence last reviewed
- 2026-08-09
- Mapping and integration scope
- 1 integration record
Integration paths
OCPP
OCPP 1.6 JSON
Publicly documented protocol capability only; installed firmware, configuration, access and message coverage require integration review.
- Mapping version
- Not recorded
- Last verified
- Not verified
Integration limitations
- A public OCPP statement does not establish which optional profiles, messages, fields or vendor extensions are enabled on an installed unit.
- No AmpNexus model and firmware mapping has been published for this profile yet.
Capability evidence
- Reported, not yet verified
Integration documentation
OCPP 1.6 JSON interface
- Integration source
- schneider-evlink-pro-ac-documented-ocpp
- Availability conditions
- Subject to the documented model, firmware, configuration, credentials and backend access route.
- Units or meaning
- Public protocol support; not an AmpNexus-verified Sentinel capability mapping.
- Freshness or cadence
- Not yet verified by AmpNexus
- Evidence source
- Schneider Electric EVlink Pro AC datasheet; Open Charge Alliance — Schneider Electric certified products
- Last verified
- Not verified
Protocol compatibility is the start of an integration assessment, not evidence that every Sentinel signal is available.
Evidence boundary
What is not yet evidenced
- Sentinel operational capability and data quality have not yet been verified for the stated model and firmware scope.
- Optional OCPP profiles, message coverage, security configuration and vendor-specific fields remain to be mapped.
- Thermal, contactor, CP/PP and protection evidence must not be inferred from protocol compatibility alone.
How to improve this profile
Expose and verify more evidence
- Connect a representative unit to the AmpNexus integration test path.
- Verify boot, status, transaction, metering, fault and firmware evidence against the applicable firmware.
- Work with the manufacturer to document vendor-specific telemetry and known limitations.